1. Shop Equipment & Supplies For Sale
  2. sku: 12167866300245563
  3. FMC 90453

FMC 90453 Aligning Spacer Brake Lathe Arbor Adapter Clutch

90543 Fmc 90453 Self Aligning Spacer For Brake Lathe With 1 Inch Arbor Adapter Clutch

( Brand: Fmc ), ( Manufacturer Part Number: 90453 ), ( Type: Off-car Bench Lathe ), ( Set Or Single Item: Single Item ), ( Country/region Of Manufacture: United States )

Review FMC Self Aligning Spacer Brake Lathe Inch Arbor Adapter Clutch

The FMC 90453 aligning spacer is an essential component for using the FMC 90543 adapter clutch with a brake lathe arbor. This spacer is meticulously engineered to ensure accurate alignment during the brake shoe reshaping process.

The spacer is made from high-quality, heat-treated steel for durability and precision. Its design includes two flat, parallel surfaces that perfectly match the contour of the FMC 90543 adapter clutch. The spacer's outer diameter measures approximately 1.75 inches, and its thickness is around 0.25 inches, providing a secure fit while allowing for proper clearance between the adapter clutch and the brake lathe arbor.

The FMC 90453 aligning spacer features two holes, with a diameter of 0.25 inches each, located near the edges of the spacer. These holes are intended for securing the spacer to the brake lathe using set screws (not included). This additional step guarantees a stable and precise setup during the brake shoe reshaping process.

The surface finish of the FMC 90453 aligning spacer is smooth and uniform, ensuring that there is minimal friction between the spacer and the adapter clutch. This reduces the risk of damage to the components during the reshaping process.

Using the FMC 90453 aligning spacer with the FMC 90543 adapter clutch and a brake lathe arbor ensures that the brake shoes are reshaped accurately, maintaining proper alignment and improving the overall performance and safety of the vehicle's braking system.

Pros and Cons of Buying an FMC 90453 Aligning Spacer for Brake Lathe Arbor 90543 Adapter Clutch

I. Introduction

The FMC 90453 aligning spacer is an essential component for using the FMC 90543 adapter clutch with a brake lathe. This part helps in aligning the clutch with the arbor, ensuring proper functioning and efficient brake machining. In this article, we will discuss the pros and cons of buying this specific aligning spacer.

II. Pros

1. Ensures Proper Alignment: The primary function of an aligning spacer is to ensure the correct alignment between the clutch and the arbor. Proper alignment leads to accurate brake machining and reduces the chances of errors or inefficiencies.

2. Durable Construction: FMC is known for manufacturing high-quality tools and components. The FMC 90453 aligning spacer is made from robust materials that can withstand the rigors of frequent use in a workshop environment.

3. Easy to Install: The aligning spacer is a straightforward component to install. It simply slides onto the arbor, positioning the clutch correctly for machining.

4. Improves Machine Performance: By ensuring proper alignment, the FMC 90453 aligning spacer contributes to improved overall performance of the brake lathe. This translates to more accurate and efficient brake machining, saving time and resources in the long run.

III. Cons

1. Cost: The FMC 90453 aligning spacer is a relatively small component, but its price tag might be higher than some users expect. It is essential to consider the cost-effectiveness of the part, especially for small workshops or individual users.

2. Limited Compatibility: The FMC 90453 aligning spacer is designed specifically for use with the FMC 90543 adapter clutch. It may not be compatible with other brands or models of brake lathes or adapter clutches.

3. Potential for Misalignment: While the aligning spacer helps prevent misalignment, it does not completely eliminate the possibility. Proper handling and installation are crucial to ensure accurate results.

IV. Conclusion

The FMC 90453 aligning spacer is an essential component for using the FMC 90543 adapter clutch with a brake lathe. Its benefits, such as ensuring proper alignment and improving machine performance, outweigh the potential drawbacks, such as cost and limited compatibility. Overall, if you are using the FMC 90543 adapter clutch with a brake lathe, investing in a high-quality aligning spacer like the FMC 90453 is a worthwhile investment for accurate and efficient brake machining.

V. Recommendation

If you are in the market for an aligning spacer for your FMC brake lathe and adapter clutch setup, we recommend considering the FMC 90453 aligning spacer for its robust construction, ease of installation, and contribution to improved overall performance. While the cost may be a concern for some users, the benefits it provides to the machining process make it a valuable addition to your workshop.

Details:

Shipped FAST FREE in the USA. AMMCO and all major brands. Fits ANY brake lathe with a 1 arbor shaft; FMC part # is 90543. Used, but in very nice condition.

Item for sale is 1 FMC 90453 Vibration Dampener / Self Aligning Spacer.

specifications shopequipm:

  • brand: Fmc
  • mpn: 90453
  • type: Off-car Bench Lathe
  • set or single item: Single Item
  • country/region of manufacture: United States

general shopequipm:

  • Automotive Tools Supplies > Shop Equipment Supplies > Brake Lathes
  • condition: Used

offer shopequipm:

  • availability: In Stock
  • quantity: 1
  • started: April 16, 2025
  • options: Ship-to-home
  • sold: 0

shipping shopequipm:

  • cost: $0.00
  • class: Standard
  • service: USPS Ground Advantage
  • carrier: USPS
  • type: Fixed
  • transit: 3-8 Days

returns shopequipm:

  • policy: No Returns

seller shopequipm:

  • city: Saint Clair, Missouri
  • # reviews: 16316
  • rating: 99.1%

payments shopequipm:

  • credit card: Visa
  • other
  • wallet: Apple-pay
type: off-car bench lathe, set or single item: single item, country/region of manufacture: united states,
category: auto parts > tools supplies > shop equipment supplies > brake lathes, sku: 12167866300245563,
Fmc 90453 Is Similar To:

Copyright © shopequipm.com