
( Brand: Vevor Salwar ), ( Manufacturer Part Number: PWFRC007 ), ( Part Type: Hydraulic Remote Pump Trailer ), ( Application: Dump Truck, Unloading, Crane, Lifting Etc ), ( Power Source: Electric ), ( Material Of Tank: Metal ), ( Rated Speed: 2600r/min ), ( Motor Power: 1.6kw ), ( Motor Voltage: Dc12-dv24 Ac220-380 ), ( Fuel Tank: 4l ), ( UPC: 278716904596 )
We must keep the tank oil level,after a work cycle, proper fill. Hydraulic oil viscosity for 22 and 46 was commonly In the installation and debugging for first time, we must keep internal fuel tank oil level, after a work cycle, should be made up, but not too full.
Lest cause valve failure.
Its widely used in sacker, Small and medium-sized lifting platform various industrial fields. Electrical and electromagnetic valve connection should pay special attention to the supply characteristics ac, dc voltage has same sign. Power unit can't filter the impurities inside hydraulic cylinder.
Absolutely forbidden motor reverse rotation and oil-free idling.
This unit comes standard in many dump trailers and it is a direct replacement for most power-up gravity-down applications. Connection for the first time, inching motor check direction, from back end, spin to counterclockwise. 8ml r, applicable to all single power unit for 3, 6, 8, 10 quart relief valve pressure: 22 map psi max. Such as pump suction air will cause the damage of and seal.
In actuators, without load, start the electric, short run test, check whether all parts smoothly, determine and correct after loading step by to normal operation. Tubing must also be clean.
If you want to change, the user according actual situation on their own through knob adjust system pressure regulating valve, but no more than nominal of. Ac power motor shell must be reliable grounding, forbidden ground operation.
Precautions: the factory production of a hydraulic power unit when leaving factory, system pressure has been set.
Reduced lift platform controlled by electromagnetic unloading valve, falling speed is a built-in balancing valve. After a year 1500 hours to replace new oil.
Color, quantity etc. Carefully check the motor and electromagnetic valve connection. So the hydraulic cylinder internal must clean.
Inching motor observe any abnormal phenomenon. When the gas tank hydraulic oil must be filtered, filtration precision is not lower than 25 microns.
Working environment temperature high use hydraulic oil of viscosity,low with low viscosity. Perfect for dump trailers-lift gates.
Its high quality starter ensure long life and a fast starting each time.
The motor is built to last, and tank has been specifically designed not crack leak under harsh conditions. Back-up manual unloading valve is used to power down. The motor terminal box note waterproof, moisture proof. Maintenance: we must keep the actuators,and pipeline cleaning,prevent dirt from entering system.
Perfect replacement pump for 12vdc controlled hydraulic systems designed horizontal mounting standard duty motor fluid choice determined by operating environment temperature material of tank: metal displacement pump: 0.