BENDPAK XPR-10AS-168 Tall Dual Post

( Brand: Bendpak ), ( Manufacturer Part Number: XPR-10AS-168 )

Review BENDPAK Extra Tall Dual width Lb Capacity Two post fits 2010

The XPR-10AS-168 BendPak Tall Dual-Width 10 Two-Post Lift is an impressive and versatile automotive lifting solution, designed to cater to a wide range of vehicle types and sizes. This lift boasts a lifting capacity of 10,000 pounds, ensuring it can handle most passenger vehicles with ease.

The dual-width design of the XPR-10AS-168 is one of its standout features. With a width of 168 inches, it can accommodate vehicles as wide as 96 inches, making it an excellent choice for larger SUVs, vans, and pickup trucks. The tall height of this lift, at 116 inches, provides ample clearance for vehicles with high ground clearance, such as off-road vehicles.

The XPR-10AS-168 is constructed with heavy-duty 11-gauge steel and features dual-sync hydraulic cylinders for smooth and precise lifting. The lift arms are adjustable, allowing for easy positioning of the vehicle, and the lift features automatic arm levelers for added convenience.

Safety is a top priority with the XPR-10AS-168. It comes with a slide-out safety bar and arm restraints, as well as a dependable slack-cable safety system. The lift also features a robust lubricated lifetime cable sheave system, ensuring smooth operation and minimal maintenance.

The XPR-10AS-168 is also easy to use, with a convenient push-button pendant control and a built-in safety lockout feature. The lift comes with a set of heavy-duty 6,000-pound rated polyurethane service jack stands and a rolling jack, making it a complete and self-contained lift system.

In summary, the XPR-10AS-168 BendPak Tall Dual-Width 10 Two-Post Lift is a robust, versatile, and safe lifting solution for a wide range of vehicles. Its dual-width design, tall height, and heavy-duty construction make it an excellent choice for garages, dealerships, and other automotive service facilities.

1. Capacity: With a 10,000-pound capacity, this lift can handle most passenger cars and light trucks.

2. Adjustable height: The lift's height can be adjusted from 6.3 inches to 70 inches, making it suitable for vehicles of various heights.

3. Dual-width design: The lift can accommodate vehicles up to 96 inches wide, making it versatile for a variety of vehicles.

4. Safety features: The lift includes safety locks, safety latches, and a slack-cable detection system to ensure the safety of the vehicle and the user.

5. Durable construction: The lift is made of heavy-duty steel and has a powder-coated finish to protect against corrosion and wear.

1. Price: The lift is on the more expensive side, which may be a deterrent for some buyers.

2. Installation: The lift requires professional installation, which can add to the overall cost.

3. Limited mobility: Once the lift is installed, it may be difficult to move it to a different location.

4. Space requirements: Due to its size, the lift requires a significant amount of space to be installed and used.

The BendPak XPR-10AS-168 Tall Dual-Width 10 Two-Post Lift is a high-quality, heavy-duty lift that is suitable for a variety of vehicles. Its adjustable height and dual-width design make it versatile, and its safety features ensure the safety of both the vehicle and the user. However, its high price and installation requirements may be a deterrent for some buyers. Ultimately, if you have the space and budget, this lift is a great investment for any home or professional garage.

If you are in the market for a heavy-duty lift, the BendPak XPR-10AS-168 Tall Dual-Width 10 Two-Post Lift is a great option to consider. Its versatility, durability, and safety features make it a worthwhile investment for any garage. However, be sure to factor in the cost of installation and consider whether the lift will fit in your space before making a purchase.

Details:

Maximum lifting capacity. The entire xpr-series is a reflection of Bendpak continuing commitment to producing lifts only highest quality, maximum safety and utmost reliability.

Lift gate delivery 135 residential is the powerful and secure XPR-10AS-168 an incredibly rapid two post lift with a robust menu of features to increase efficiency productivity. A set of our 63mm stacking adapters included as standard accessories.. If not properly outguessed, imperfections in the metal may bubble during curing process and most likely will cause chips powder.

On the level our dual-synchrony equalization system maintains equal lifting and provides operators with a stable, vehicle working condition. The results are lower operating expenses and higher productivity. Clear floor convenience our model's provide unobstructed floor space allowing technicians to easily move toolboxes, transmission jacks, oil drains and other equipment underneath the elevated vehicle.- reach front arm max.

D - floor to overhead switch: ,191mm. Some more Bendpak xpr-series exclusives include: 16 individual maintenance-free um load bearings, single-piece columns, triple-telescoping arms, extra-tall lifting carriages and oversized 5 cable sheaves to vastly extend the life expectancy of moving suspension components. All of the extended height model's in our xpr-series can easily lift some your largest full-sized pickups and commercial vehicles including sprinters, yet still provide specific capability for sport compact cars, both foreign domestic. That's the Bendpak benefit.

Specifically, the powerful and secure asymmetric XPR-10AS-168 is an incredibly rapid lift with a robust menu of features to increase efficiency productivity, without overwhelming you serviceable parts necessary maintenance. At the same time, swing-away arms provide a larger drive-thru clearance. Time of full rise:45 seconds max load per arm:2,500 lbs. Automatic arm restraints each is equipped with durable that automatically engage time the lift raised.

This exclusive Bendpak design feature saves you maintenance costs throughout the life of your lift aren going to find friendly sensibility like anywhere else. No one surpasses us in quality and safety. Get the same exceptional direct-drive lifting performance, clear floor convenience and genius asymmetrical rotated post system as with standard xpr-10as, but an added up top.

Afterwards, the parts are washed in our 5-stage phosphate tanks that can accommodate up to 25' long. Extended height columns provide added overhead clearance and an adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements.: ,524mm.

E - inside columns: wide ,845mm. B - width overall: narrow ,480mm. Outguessing pre-bakes the parts in a curing oven, reducing possibility of blemishes that may be hiding pores metal mm.

Bendpak XPR-10AS-168 extra tall, dual- width , 10,000 lb. Optional column extension gives you the flexibility of increasing overhead clearance to maximize vehicles can service. Screw pad adjustment:mm.: ,079mm.

Single-point safety release the single point and dead man operation controls makes every one of our xpr-series lifts easy to operate safe use. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on an electrostatic ally grounded conveyor line. Not all Bendpak lift model's meet the standards as prescribed by ANSI Ali Alcott-2006 or ul 201.

Not now, ever rotated columns the XPR-10AS-168 features for added clearance when opening vehicle doors. The superior-design high barometer, mechanically-loaded rod seals make leakage is a thing of past while specially formulated abrasion-resistant urethane wiper provides exclusion protection specifications: model xpr-10 as-168lifting capacity 10,000 lbs.- reach rear arm min. Once cleaned, they're immediately dried to avoid rust production, and then outguessed.

Max capacity front axle 5,000 lbs. Our newest line of xpr-series 2-post lifts offers a wide selection durable, safe and reliable systems for virtually every lifting application.

Its completely up to you. B - width overall: wide ,683mm. Tall, narrow fleet vans have been the rage in Europe for more than a decade and are just now becoming popular USA.

The XPR-10AS-168 is a rugged, close-top model lift with 10,000-lb. Companies like FedEx, DHL and Microsoft already employ sprinters for delivery transportation services. Don't they sound like the kinds of clients youth have.

C - width outside of columns: wide ,581mm. You'll notice our 53 tall carriages are considerably taller than most, which minimizes the stress placed on load bearings and columns. Max capacity rear axle 5,000 lbs.: ,156mm.

Single-piece columns we purposely manufacture the using construction for added strength and less fatigue under heavy load conditions. Taller lift carriages take a close look at our the lifting assembly that arms are attached to and then competition. N - drive-thru clearance: wide mm.

The welded cylinder body is made from robust steel tubing produced to exceed ATM specifications.

The Bendpak XPR-10AS-168 is super-industrial-strength piece of equipment that has it all: leading-edge technology, top-of-the-line materials, designs way ahead its time and a 5-ton lifting capacity. F - reach front arm min. Included truck and van adapters others might charge extra for these necessary adapters, but they're standard with every xpr-series lift.

Org for a complete list or contact Bendpak via contact. High-volume, low-pressure equates to less workload placed on the entire hydraulic system. N - drive-thru clearance: narrow mm.

The xpr-series offers an abundant roster of options and accessories that allows you to fully tailor your lift unique circumstance. Now, some estimates suggest it will reach as high 23 before the end of decade. Sound complicated to operate. Don't worry.

Motor vac 60 Hz. Lifting capacity bolt-on 24 column extensions provide added overhead clearance expandable top beam accommodates wide or narrow drive-thru configuration padded safety shutoff bar exclusive true-metric arm design for more versatile positioning 30 rotated single-piece columns single-point release drop-end arms a lower pad height dual hydraulic direct-drive cylinders over-sized 53 tall carriage superior strength and durability electric power system large, 17 x 19 a36 steel base plate self-lubricating Duran-glide um polyethylene bearing system safety locks in each spaced every 3 automatic restraints heavy-duty 1/2 aircraft-quality equalizer cables oversized cable sheave diameter reduces fatigue 4-piece 63mm stack able adapter set comes standard triple-telescoping design versatile drop-in contact pads with adapters Ali approved. 5 of the full-size van market in I - reach rear arm max.

Triple-telescoping front arms and two-stage rear increases overall arm positioning for lifting a variety of different wheel base vehicles. Pad height : 4. Its like two lifts in one.

Maintenance-free load bearings rather than using roller that need to be constantly lubricated, every xpr-series lift carriage uses high-tech um ultra-high molecular weight polyethylene never lubrication and are designed last the entire life of. After the parts are washed and outguessed, any surfaces or threaded holes that need to be masked plugged, done so with high-temperature masking tape silicone plugs. Pressurized hydraulic fluid flows from the power-unit, through hollow cylinder rods then enters body and fills inside cavity.

This combination of superb base material and superior processing ensures that the cylinders remain straight, smooth last a very long time. A dual-synchrony equalization system maintains equal lifting and provides operators with stable, level vehicle working condition. Every XPR-10AS-168 comes with: direct-drive two-post car lift technology Bendpak lifts feature low-pressure help cylinders eliminating the need for lifting chains or screw mechanisms most commonly found on other designs. Features:lift arms shown with optional foot guards 10,000-lb.

This true asymmetric lift features 30 rotated columns for added door-opening clearance and interior car access.

Durable powder-coat finish all xpr-series lifts feature a that gives the metal high-quality, extremely which can withstand even harshest environmental or chemical conditions. Detailed instructions included with every lift are installation and maintenance instructions, graphic safety decals, vehicle lifting point guide a instruction placard to train personnel on proper procedures guidelines. K - rise: ,753mm.

Ideal for trucks and vans with running boards or auxiliary fuel tanks. Dual help low-pressure cylinders minimize leakage and offer better reliability, smoother operation less maintenance costs throughout the life of your lift. Help direct-drive technology offers better reliability, smoother operation and less maintenance. Hereto see if the rat fee applies to you.

All of Bendpak extended height , clear floor asymmetric model lifts feature dual direct-drive low-pressure cylinders that minimize leakage and reduce the workload placed on entire hydraulic system. When it comes to ease of use, our dual-synchrony equalization system and user-friendly controls are the stuff legend. In fact, your Bendpak XPR-10AS-168 might be the last lift you ever purchase. Low-profile, dropped-end frame contact pads squeeze under even the lowest compact and sport vehicles.

The powder sticks to surface in a fashion similar how dust television screen. When you get a Bendpak, more than just fantastic lift. Whatever your requirements, theres a Bendpak xpr-series 2-post lift designed to meet needs.

L - max lift height pad only: ,905mm. The powder is finally applied using an electrostatic spray gun.

The XPR-10AS-168 features double-telescoping screw pads with gouge and tear-resistant polyurethane to help increase workplace safety reduce operating costs. E - inside columns: narrow ,642mm. M - max lift height 3 adapter: 75.

C - width outside of columns: narrow ,378mm. Overall arm sweep and minimum reach are also extended to precisely lift vehicles that have anybody construction, oem recommended pick-up points wide or narrow wheelbase configurations. Not all Bendpak lift model's meet the standards as prescribed by ANSI Ali Alcott-2006 or ul kg. The pressure of hydraulic fluid extends piston rod downward raising cylinder body and lift carriages.

A - height overall: ,293mm. Don't get us wrong we like to keep it simple at Bendpak, but definitely dumb down.

Auto shutoff a rigid, padded safety bar automatically stops the lift should vehicle come in contact with overhead structure. The micro-smooth chrome-rod is machined from high-yield, ground and polished c micro-alloy steel plated to a minimum of. But long before you start looking at options, you'll be impressed with the list of standard features and capabilities packed into every Bendpak xpr-series lift.

The xpr-series lifts include a wealth of standard and optional features to support operators need for performance security. Once the parts are powder coated, carts rolled into our curing oven and baked at f for 45 minutes diametrically, to ensure superior cylinder operation life. High-speed hydraulics free-flow, high-pressure 3/8 hydraulic lines, a high-flow pump and integrated ac power-unit increase ascent descent speed rates for enhanced productivity. Featuring a revolutionary 30 rotated column scheme for added door-opening clearance, the XPR-10AS-168 minimizes costly damage to customer vehicles and interior car access, even when its between posts.

You get peace of mind.

part #: xpr10as168 prices

• $22.61-$80.64

specifications shopequipm:

• for years: 2010
• brand: Bendpak
• mpn: Xpr-10as-168

Seller shopequipm:

• zipcode: 93060
• city: Santa Paula, California

Offer shopequipm:

• Sold: 0
• bids: 0
• Started: February 27, 2017, 1:02 pm
• best offer: false
• quantity: 1

Ratings:

1. NiceThank you. 02-22-17
2. A 02-24-17
3. Very Good Transaction Quick Shipping 02-26-17
4. Good communication, promptly shipped, arrived ahead of estimate. 02-21-17
5. Good item, Fast shipment, Thank you, 02-22-17

General shopequipm:

• Motors > Automotive ToolsSupplies > Shop EquipmentSupplies
• in stock: Yes
• condition: New

Payments shopequipm:

• VisaMC
• AmEx
• PayPal
• Discover

Shipping shopequipm:

• cost: $0.0
• handling: 4 days
• type: Flat

Returns shopequipm:

• paid by: Buyer
• type: Money Back
• details: All returned merchandise will require authorization and freight to/from the manufacturer is the customers responsibility. The item must be unused, in the same packaging and must be in a new resellable condition. Credit will not be issued until merchandise has been returned and Mile-X Equipment,has received credit. Restocking fees vary by manufacturer. for additional information on restocking fees
• time: 30 Days
• policy: returns accepted

Bendpak XPR-10AS-168 Is Similar To:

• 5175401 Bendpak Automotive Extra Tall Post Lift Capacity (49.5% similar) The XPR-10AS-168 features double-telescoping screw pads with gouge and tear-resistant polyurethane to help increase workplace safety reduce operating costs. Featuring a revolutionary 30 rotated column scheme for added door-opening clearance, the XPR-10AS-168 minimizes costly damage to customer ...(August 25th, 2018)
• Hd-9xw Bendpak Wide Tall 4-post Lift Car Truck (41.8% similar) This item arrives on a flatbed semi truck a forklift is required to unload it...(August 19th, 2016)
• Hd-7p Bendpak 7 000 Lb Four Post Medium Duty Lift Standard Width (34.9% similar) For added safety, a secondary lock system acts as a slack cable device to engage in the unlikely event of cable failure. Wheelbase capacity durable powder coat finish all HD series lifts feature a durable powder coat finish that gives the metal a high quality, extremely durable finish which can ...(July 20th, 2016)
• Hdo-12lsx-d Bendpak Alignment Lift 12 000 Lbs Capacity Open Front (34.5% similar) Buyer contact. Cleanup see pics...(September 17th, 2016)
• Xpr-18c Bendpak 18 000 Lb Two Post Clear Floor Hydraulic Lift 849672001508 (33.6% similar) Max lift height 6 adapter mm. Special voltage s available upon request kg. Free shipping customer must be present at time of delivery. Reach front arm max. height overall mm. Reach front arm min. Low profile, dropped end frame contact pads squeezes under the lowest compact and sport vehicles mm...(August 2nd, 2016)
• Bp-12 Bendpak Bend Pak Post Dual Ramp Lift (46% similar) This is a 12,000 lb lift capacity with air operated safety release, on off ramps pressure gauge...(September 19th, 2018)
• Hd-7pxn Bendpak 4 Post Car Lift (34.2% similar) Not all Bendpak lift model's meet the standards as prescribed by ANSI Ali ALCTV-2006 or ul combined rating of these cables is more than 822 maximum lifting capacity entire. We insist on using dual-hub cable sheaves, even if they cost us more to make kg. Runway height 4MM. Dependable design 4 heavy...(February 15th, 2017)
• Hd-9st Bendpak Post Lb Lift 849672001416 (42.4% similar) Dual-hub cable sheaves reduce stress and fatigue on the axles, cables. The powder is finally applied using an electrostatic spray gun. Outguessing pre-bakes the parts in a curing oven, reducing possibility of blemishes that may be hiding pores metal. First, all parts are visually inspected before ...(January 14th, 2019)
• Hd7w Bendpak 7 000-lb Capacity (29.3% similar) If not properly outguessed, imperfections in the metal may bubble during curing process and most likely will cause chips powder. Low-deck runways our low accommodate even the lowest cars. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints, before being hung on ...(May 5th, 2017)
• Hds-35x Bendpak 4-post 35 000 (40.5% similar) This photo is not the actual taken of lift but its same. Delivery fee. Possibly some dings or chips. For sale if this extra long length 35,000 pound 4 post lift which can large tractor trucks, RVs, as well any regular size car or truck...(May 31st, 2017)
• Mx-18c Bendpak Lifts Capacity Clearfloor Standard Arms (30.3% similar) Final sale barely used 10 car lifts tops 2 post lift system, like a new. Disassembly, shipping, and handling tbs...(October 6th, 2018)